No hay cálculos aún
No hay favoritos aún
Calculate pesticide dilution using multiple method or ppm concentration for accurate mixing.
Mix pesticides accurately with two methods: multiple dilution (e.g., 1000x) or ppm concentration. Calculate pesticide amount, water volume, and total spray solution. Supports both liquid and dry formulations. Accurate mixing means effective control without phytotoxicity or residue violations.
You poured 50 ml of insecticide into a 16-liter backpack sprayer and sprayed your tomato plants. Two days later, leaves were curled and brown. You mixed at 320x instead of the labeled 1000x — three times too strong. That batch cost you 40% of your tomato crop. Always calculate the dilution before pouring.
Accurate dilution ensures effective control while avoiding phytotoxicity and residue. Always follow label instructions.
A: Multiple dilution (e.g., 1:1000) means 1 part pesticide to 1000 parts water. PPM (parts per million) expresses the active ingredient concentration in the final spray. Use multiple when the label says "dilute 1000x." Use ppm when the label specifies a target concentration like "500 ppm active ingredient."
A: Typical ranges: field crops 200-400 L/ha, orchards 500-1500 L/ha, vegetables 300-600 L/ha, greenhouse 100-300 L/ha. Calibrate your sprayer to know your actual output. Higher volume = better coverage but more time and water.
A: Only if the labels confirm compatibility. Mixing incompatible products can cause chemical reactions that reduce efficacy or cause phytotoxicity. Always do a jar test first: mix small amounts in a glass jar, wait 15 minutes, and check for separation, curdling, or heat.